Be the Best Sensors’ Manufacturer and One Stop Solution Service

We warmly welcome you to send us your requirements or any concerns for the technical consultations.

Inductive sensor NEB6-12GM50-E2

Inductive proximity sensor

Inductive sensor NEB6-12GM50-E2

  • Increased operating distance
  • 6 mm flush
  • Product Detail

Datasheet excerpt: Technical data of  NEB6-12GM50-E2

General specifications
Switching function Normally open (NO)
Output type PNP
Rated operating distance 6 mm
Installation quasi flush
Output polarity DC
Assured operating distance 0 ... 4.8 mm
Actuating element mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
18 mm x 18 mm x 1 mm
Reduction factor rAl 0.28
Reduction factor rCu 0.2
Reduction factor r304 0.7
Reduction factor rBrass 0.35
Output type 3-wire
Nominal ratings
Installation conditions
A in steel 1.0037 (St37): 2.4 mm
in other metal: 1.2 mm
B 12 mm
C 18 mm
F 24 mm
Operating voltage 10 ... 30 V DC
Switching frequency 0 ... 800 Hz
Hysteresis 0.06 ... 1.2 mm
Reverse polarity protection yes
Short-circuit protection pulsing
Overload resistance yes
Wire breakage protection yes
Surge suppression yes
Ripple 10 %
Voltage drop ≤ 2 V
Repeat accuracy 0.3 mm
Operating current 0 ... 200 mA , above 70°C max. 150 mA
Off-state current ≤ 10 µA
No-load supply current ≤ 15 mA
Time delay before availability ≤ 50 ms
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1740 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN IEC 60947-5-2
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 ... 85 °C (-13 ... 185 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type cable PUR , 2 m
Core cross section 0.34 mm2
Housing material brass, nickel-plated
Sensing face PBT
Degree of protection IP67
Mass 80 g
Dimensions
Length 50 mm
Diameter 12 mm

PREVIOUS:Inductive sensor NEB8-12GM50-E2-V1

NEXT:Inductive sensor NEB4-8GM50-E2-V3

Leave a Reply

https://www.facebook.com/thatone.guy.756

https://twitter.com/ElectricKjt

+86 025 65019201

+86 13951751584

+86 13951751584

kaijite3@kjtsensor.com

2561582746

Leave a message